Industry Applications
Diamond Wheels and Burrs for Carbide Tool Manufacturing
Tool and cutter grinders, reconditioning shops and die makers sharpen and form tungsten carbide all day. The abrasives they use set their throughput and their finish quality.
Request a QuoteWhat makes this industry demanding
- Tungsten carbide is abrasive and hard — wheels must cut freely without loading or burning.
- Flute, gash and clearance grinding need burrs and wheels that hold form in tight radii.
- Reconditioning shops need long wheel life to keep cost per tool economical.
- Finish on cutting edges directly affects the performance of the finished tool.
How CDFIT solves it
CDFIT supplies resin and electroplated diamond wheels and burrs made for carbide tool grinding and reconditioning. They stay free-cutting in deep flutes, hold form in tight radii and deliver edge quality that preserves the performance of the tool being ground.
Recommended products
Resin Diamond Burr Grinding Wheel (Deburring)
View product →
Electroplated Diamond Grinding Wheel (High Hardness)
View product →
Electroplated Diamond Grinding Disc 6 inch for Gem Polishing (High Hardness)
View product →What you gain
Free-Cutting on Carbide
Bond and concentration selected so wheels cut without loading or metallurgical burn.
Holds Tight Forms
Burrs and formed wheels retain geometry in flutes, gashes and small radii.
Economical Wheel Life
Extended life lowers cost per tool ground for reconditioning and production shops.
Ready to specify the right tool?
Send your tool geometry for a wheel and burr recommendation.
Start an Inquiry